Marine Wkse Series Twin Screw Pump

Marine Wkse Series Twin Screw Pump

Technical Parameters

• Flow rate: Up to 450 m³/h
• Working pressure: ≤ 2.4 MPa
• Speed: ≤ 1450 r/min
• Viscosity range: 1 ~ 1000000 mm²/s
• Temperature range: -20 ~ 120 °C
• Solid phase content (by volume): ≤ 15%
• Solid particle size: ≤ 8.5 mm
• Drive direction: From the drive end, clockwise rotation is standard (counter-clockwise rotation available upon request)
• Note: If operating under conditions beyond the above – mentioned range, specific requirements should be indicated when ordering

Advantages

1. Clean and convenient: Can transport media with good self – priming ability and no emulsification.
2. Stable and reliable: No pulsation, no shear, suitable for conveying sensitive media.
3. High suction performance: Can transport high – viscosity media, and the suction vacuum can reach up to 8.5 m water column.
4. Wide application range: Suitable for conveying various media with different properties, including non – Newtonian fluids.
5. Easy maintenance: Simple structure, easy disassembly and assembly, low maintenance cost.
6. Long service life: High – quality materials and reasonable structure ensure a long service life.
7. Multiple drive options: Can be driven by an electric motor, diesel engine, etc., and can be equipped with a variable – frequency speed – regulating motor to meet different flow requirements.
8. High efficiency and energy – saving: The unique design of the screw makes the pump have high volumetric efficiency and mechanical efficiency, saving energy.
9. Low noise: The pump operates with low noise, providing a good working environment.
10. Flexible installation: Can be installed in various ways, such as horizontal, vertical, etc., to meet different site requirements.

Structural Features

1. Screw structure: The pump uses a pair of screws with a special tooth profile, which mesh with each other to form a sealed cavity. As the screws rotate, the sealed cavity moves axially, conveying the medium from the suction end to the discharge end.
2. Bearing support: The screws are supported by high – quality bearings, ensuring stable operation and long service life.
3. Sealing method: Various sealing methods are available, such as packing seal, mechanical seal, etc., to meet the requirements of different media for sealing.
4. Pump casing: The pump casing is made of high – strength materials, with good pressure – bearing and corrosion – resistance performance.
5. Safety valve: Some models are equipped with a safety valve to protect the pump and the system from over – pressure damage.

Application

• Chemical industry: Conveying various acids, alkalis, salts, organic solvents, and other chemical raw materials.
• Petroleum industry: Conveying crude oil, heavy oil, fuel oil, lubricating oil, etc.
• Food industry: Conveying edible oil, juice, syrup, etc.
• Pharmaceutical industry: Conveying various pharmaceutical liquids.
• Paint industry: Conveying paints, resins, pigments, etc.
• Other industries: Conveying high – viscosity pastes, non – Newtonian fluids, and media containing fine solid particles.

Form Code of Wkse Series Twin Screw Pump

1. Pump type code: Wkse
2. Nominal size code: Represented by numbers, such as 25, 40, etc., indicating the nominal size of the pump.
3. Structure code:
   • H: Horizontal pump
   • V: Vertical pump
4. Sealing method code:
   • M1: Mechanical seal (standard type)
   • M2: Double mechanical seal
   • P: Packing seal
5. Material code: Different materials are represented by different codes to meet the requirements of different media for corrosion resistance.

Performance Data Tables (Partial representation as full tables are large)

The complete set of performance data tables provides detailed parameters for different pump models under various operating conditions, which can be used for pump selection and system design.

Attention please: The description may be different with the product, please contact us for quotation.
Tag: Our other products 
Click here to send inquiry via whatsapp