High-Intensity Marine Reflective Tape
Marine-Grade Safety Solution for Lifesaving Equipment
Key Features:
-
Dual installation options: Sew-on type & adhesive-backed version
-
Superior water resistance with 5-year durability
-
Certified by IMO and US Coast Guard for maritime use
-
High-visibility performance in low-light and nighttime conditions
How to Use Marine Retro-Reflective Tape (SOLAS-Compliant)
1. Purpose & Applications
Marine retro-reflective tape enhances visibility in low-light conditions, critical for:
- Life-saving equipment: Lifeboats, life rafts, life jackets, and immersion suits.
- Emergency exits: Marking escape routes on ships.
- Hazardous areas: Highlighting steps, edges, or obstacles on decks.
2. Installation Requirements (IMO A.658(16) Compliance)
- Placement:
- Lifeboats: Apply to sides, top edges, and bottom (if non-self-righting). Minimum 150 cm² per section, spaced 80 cm apart.
- Life rafts: Wrap around the canopy and add a cross-shaped mark (half the raft’s diameter) on the underside.
- Lifebuoys: Four 5 cm-wide bands evenly spaced around the circumference.
- Life jackets/Immersion suits: Total reflective area ≥400 cm², positioned for visibility from all angles.
- Material: Use SOLAS-approved tape (e.g., Type I for indoor/short-term exposure, Type II for outdoor/long-term durability).
3. Step-by-Step Application
- Surface Prep: Clean thoroughly to remove oil, dust, or moisture. Dry completely.
- Cutting: Measure and cut tape to size using sharp scissors or a knife.
- Application: Peel off the backing and press firmly, avoiding bubbles. For curved surfaces (e.g., lifebuoys), work slowly to maintain adhesion.
- Curing: Allow 12+ hours for full bonding before exposure to water or movement.
4. Key Precautions
- Avoid static: Ground the tape during application in flammable environments.
- Prevent contamination: Store unused tape in a clean, dry place.
- Regular inspection: Check for peeling, fading, or damage. Replace immediately if compromised.
- Temperature: Apply in temperatures >15°C for optimal adhesion.
- Compatibility: Use only SOLAS-certified tape (e.g., “DM1101A” for self-adhesive, “DM1101B” for sew-on).
5. Maintenance & Replacement
- Cleaning: Wipe gently with mild soap and water; avoid abrasive materials.
- Lifespan: Replace every 3–5 years (or per manufacturer guidelines) due to UV degradation.
By following these guidelines, marine operators ensure compliance with SOLAS regulations and maximize safety during emergencies.
Note: The description might be incorrect, please contact us for confirmation.
Click here to contact us via whatsapp for details
Tag: Our other products
