V Type Oil Seal
概述:
V型圈是纯橡胶材质制造,中间未加镶嵌金属等加固物,因而具有很好的弹性,容易拉伸,安装极为方便。它是靠配合面过盈,随轴一起旋转。
V型圈由于其结构简单,使用方便,工作可靠,使得有储液槽及安装精度要求时,安装尺寸更加紧凑,使用准确。
广泛应用于工程机械、水压设备、辊筒、煤辊、炼钢等机械设备中。
Overview:
V-ring is made of pure rubber material, the middle without fiber or metal sheet reinforcement structure, which has a very good flexibility, easy to stretch, and very convenient installation. It is on the interface interference fit, and rotate with the shaft.
V-ring because of its simple structure, easy to use, high reliability, making the relevant groove and installation design work greatly reduced, therefore, V-ring in industrial engineering, water processing equipment, rolling machines, lathes and other fields have been widely used.
(图片中的标注:a.轴 b.密封面 c.圈 – a. Shaft b. Sealing surface c. Ring)
V型圈的特点及优点:
V型圈依靠其自身弹性能固定于轴上,密封的唇缘用一最小的接触力和轴表面保持接触。
V型圈的密封唇可将轴偏心、腔径轴的同心度及轴的加工误差所造成的间隙完全密封。
密封圈可防止内部油液或油脂外泄漏,同时防止外部的灰尘、颗粒物侵入。由于V型圈随轴做旋转运动,由于离心力的作用,其防尘作用特别好,防止异物入侵,工作效率高。
特点:
对于其它密封圈不足,V型圈是靠其弹性的密封唇形成径向密封作用,但因它具有弹性的力加强和高速旋转的密封,在轴的跳动大小要求较低,适合公差配合,装配简单,同时可补偿腔体转轴心的问题。
因此它具有以下优点:
-
不含有金属构件的纯橡胶密封材料;
-
设备的密封面方便加工,没有安装加工方面的要求;
-
取消了轴配合表面和加工表面、硬度的要求,轴的表面不必淬硬;
-
安装和拆卸简单方便;
-
高压缩变形率小,因此摩擦力小,摩擦损失及摩擦生热少,使用寿命长;
-
具有密封和防尘双重作用。
The characteristics and advantages of V-ring:
The V-ring is fixed to the shaft by its own elastic tension, and the flexible sealing lip is kept in contact with a smaller contact force and the surface of the shaft.
The flexible sealing lip compensates for the shaft eccentricity, the different shafts of the shaft and the machining error of the shaft.
The sealing lip prevents the internal grease or oil from leaking out while preventing external dust, dirt, etc. from entering. As the V-ring is at the axis of rotary motion, due to the role of centrifugal force, the role of the basic anti-dust is particularly good, to prevent the intrusion of debris.
Unlike other oil seals, V-rings rely on their elastic seal to form a radial seal. Seal it has a good activity and adaptability, so to other seals need a small tolerance with the simple design, while making up the rotation difference.
So it has the following advantages:
-
Pure rubber elastomer material without metal parts;
-
Sealing surface of the equipment processing is convenient;
-
Cancel the shaft with the surface processing and surface accuracy, hardness requirements, the shaft surface without hardening;
-
Installation and removal of simple and reliable;
-
Surface contact pressure is small, so the friction, friction loss and friction heat loss, long service life;
-
Has a sealing and dust-proof effect.
一、V型圈有四种标准设计
| 截面形状 Sectional Shape | VA型 VA Type | VS型 VS Type | VL型 VL Type | VE型 VE Type |
|---|---|---|---|---|
| 说明 Description | 最常用的设计 The most commonly used design | 本截面精,也是基型,与VA型有紧密的配合。The cross section is accurate, also is the basic type, with VA type has a close fit | 非常普通的截面,结构紧凑,损耗功能小,主要将唇位改置于截面的中心部分,适合旋转轴/密封空间较小的场合使用。Very common section, compact structure, low loss, the position of the lip is placed in the central portion, suitable for use in the space of the rotating shaft / sealing small. | 具有最大截面中唇的特点,为在较少的压力下适合用于极端的密封件。Has the largest cross-section in the center lip feature, suitable for use in extreme pressure under the pressure. |
| 尺寸范围 Size Range | 轴径 Shaft diameter: 2.7~2020mm | 轴径 Shaft diameter: 4.5~2140mm | 轴径 Shaft diameter: 105~2025mm | 轴径 Shaft diameter: 450~2010mm |
二、材料
-
标准的材料为邵氏A60的丁腈橡胶(NBR)
材料代码为(N60)
介质:矿物油、空气、水、乳化液、油脂
温度:-40℃ to +100℃ -
佛氏A65的氟橡胶(FPM)
材料代码为(V65)
介质:矿物油、合成油以及油脂、酸、碱
Material
V-rings are usually supplied with two materials:
-
The standard material for the Shore A60 nitrile rubber (NBR)
Material code (N60)
Medium: mineral oil, air, water, emulsion, grease
Temperature: -40 ℃ to +100 ℃ -
Shore A65 fluorine rubber (FKM/VITON)
Material code (V65)
Medium: mineral oil, synthetic oil and grease, acid, alkaline
-
Other sealing materials see O-ring selection of materials
Note: The description may be different with the product, please contact us for quotation.
Click here to contact us via whatsapp for details
Tag: Our other products




